PMC® 1290

PMC® 1290 is a co-extruded sheet comprised of an impact-modified, high gloss ASA cap over a medium impact ABS core. This product is designed to offer a sheet that provides the impact toughness & outdoor weather resistance of ASA, with the ease of processing & bonding of ABS.

Applications

  • Interior & exterior panels,
  • Dashes
  • Consoles
  • Covers
  • Shrouds

Properties

  • Property Typical Value Units Test Method
  • Specific Gravity 1.12 ISO 1183
  • Gloss, 60°
    (textured*, post-formed, male tooling)
    90 - 100 % ASTM 523
  • Shrink Rate 0.5 – 0.7 % ISO 294-4
  • Flexural Modulus 285,000
    1,965
    psi
    MPa
    ASTM D790
  • Tensile Strength at Yield 5,640
    38.9
    psi
    MPa
    ASTM D638
  • Gardner Impact at 73°F (23°C)
    at 32°F (0°C)
    at -22°F (-30°C)
    320(36)
    312(35)
    302(34)
    in*lbs (Joules) ASTM D5420
  • HDT at 66 psi (0.45 MPa)
    at 264 psi (1.45 MPa)
    200 (93)
    172 (78)
    °F (°C) ASTM D648
  • CLTE (-30°C to 80°C) 4.2 x 10-5
    7.6 x 10-5
    in/in/°F
    mm/mm/°C
    ISO 11359

* Property values tested on co-extruded sheet, 0.187” thick, 10% cap layer, up to 30% regrind used.

NOTE: Data values are typical properties and are not to be construed as specifications. Users should confirm results by their own tests and evaluation methods. SIMONA PMC makes no warranties, expressed or implied, concerning the suitability of use. No freedom from infringement of any patent of others is to be inferred. SIMONA PMC reserves the right to make additions, deletions, or modifications to this information at any time without prior notification.