PMC® 440
PMC 440 is a monolithic copolymer polypropylene sheet. Sheet can be produced with or without UV additive for increased weatherability performance.
Applications
- Orthotics & prosthetics
- Fascias
- Covers and Claddings
Properties
- Property Typical Value Units Test Method
- Specific Gravity 0.905 ASTM D792
- Tensile Strength at Yield 3,600
24.8 psi
MPa ASTM D638 - Flexural Modulus 169,000
1,165 psi
MPa ASTM D790 - Notched Izod Impact, 23°C 14.7 ft-lb/in ASTM D256A
- HDT, 0.45 MPa 180
82.2 °F
°C ASTM D648
Preliminary datasheet values based on trial samples and material declarations, continued data analysis in progress
NOTE: Data values are typical properties and are not to be construed as specifications. Users should confirm results by their own tests and evaluation methods. SIMONA PMC makes no warranties, expressed or implied, concerning the suitability of use. No freedom from infringement of any patent of others is to be inferred. SIMONA PMC reserves the right to make additions, deletions, or modifications to this information at any time without prior notification. Rev. 07.20